|
James Stamford, CT
Boat Name: "C" Student
Model/Year: 1987
Hull No.
Hailing Port: Stamford |
04/11/2005 11:13 AM Pacific Time
Hi guys, My roller furling was attached in sections by these white joiners. When I took the sail off, i noticed some were in bad shape, and breaking, so I decided to replace them. The only problem is that I can't find anywhere that sells them. They were plastic joiners, allowing a steel cable to run through them. Does anyone know where i can find something like this, or do I have to go to a sailmaker or the like? Thanks!
James |
Bayard Gross Greenwich, CT
Boat Name: Baby Blue
Model/Year: 1981
Hull No. 9911
Hailing Port: Greenwich, CT |
04/11/2005 6:59 PM Pacific Time
James:
I am having trouble understanding your problem.
If you are refering to the furler mechanism, or more specifically the furler extrusion, I think you need only contact the manufacturer.
Otherwise, I think you might be refering to something on the sail which by one manufactuer is called a Kiwi Slide:
http://www.anzam.com/rr_index_003.htm
Have you tried Hathaway's? But note, I think they close around 12 PM on Saturday.
I live next door to you in Greenwich. |
|
|
|