Michael Smalter Webster, NY
Boat Name: Marrakesh
Model/Year: 1986
Hull No. 13645
Hailing Port: Rochester, NY |
01/12/2004 4:30 PM Pacific Time
Randy created a great page of maintenance tips and FAQs that would be useful to those on the clubhouse.
http://www.staff.uiuc.edu/~rwahlfel/c22maint.htm |
Boat Name:
Model/Year:
Hull No.
Hailing Port: |
01/13/2004 8:27 AM Pacific Time
Hi All,
This is my first pass at using Lowell's new system. I hope I don't mispell anything.
Thanks for the kind words about the maintenence site, Mike.
I will be moving the C22 Maintenance site to another address. I have it on a University of Illinois site and the UI is going to discontinue service at the end of this spring semester. I'll notify the list when I get a new address.
I'm not sure what I'm going to do. I would like to get a web server that handles databasing. Maybe allow some fancy searching for images based on type of work you are interested in. For example, search for all swing keel pictures or all images about mast raising. Not promising anything, but I'll keep you posted.
Randy Wahlfeldt
Roboboat 12566
Clinton Lake
|
Boat Name:
Model/Year:
Hull No.
Hailing Port: |
03/04/2004 7:56 AM Pacific Time
I just ordered several parts from CD and again they send only parts without directions. They must think I'm a mind reader. Parts ordered were gaskets for the hatch and the pop top. There were never any gaskets when I purchased this boat, so no old placement lines, and the boat has been refurbished. Can someone please give me an idea of where to place these gaskets. At the top or bottom of the lip? I think the top closest to the flat surface of the top.
I ordered table brackets but have no measurments for a table either. |
Erv Zimmerman Anchor Bay Shores, Michigan
Boat Name: Adventuring
Model/Year: 1973
Hull No. 1787
Hailing Port: Anchor Bay, Lake St. Clair |
03/05/2004 1:20 PM Pacific Time
Table dimensions/details can be found at: http://www.fleet130.org/boatphotos/ . Be sure to measure your boat to make sure they are correct for it. The half-table works great if you don't need the full sized one. If you're interested. I'll post measurements for it also.
Erv Zimmerman
Adventuring C-22 #1787
http://www.fleet130.org/
http://www.crcasao;.org/ |