Quick Order   |  Gift & Wish Lists   |   Log In   




 

click for larger view

Vent Solar Powered
4" Stainless Steel New


Part #: Z4379

Price: $184.99


[Add to private Shopping List]
[Add to public Wish List]
Quantity:

Scroll Down for
Additional Pictures

Proper ventilation is imperative to prevent a buildup of moisture that will promote the growth of mold and mildew winter or summer. Damage to interior fabrics and electronics as well as the unpleasant odors of a musty boat are eliminated with proper ventilation. I've never had a problem with mildew in my 20 year old boat because I added a solar vent before I ever sailed it.

Especially important on smaller boats where space is at a premium, our low profile vent is unobtrusive on deck as it sits only 2-3/8" high. A fan moves 1000 cubic feet of air per hour. The solar cell runs the fan and charges a built in battery. The fan will continue to run for up to 24 hours during nights or bad weather when the sun is not available.

Features a selector switch to change fan direction. You can switch from an exhaust vent to an inlet vent, or set it on charge mode. A removable insect screen is also included. The newer design also includes a small LED light that can be switched on and off as well.

Fits a standard 4-3/4" vent hole cutout in the deck which makes it compatible with Nicro vents built in the past. Outside diameter is 10". Stainless steel cover.

Features:
  • Moves 1000 cubic feet per hour
  • Stainless steel cover
  • No external power or wiring required
  • Rechargeable NiMH battery
  • Interior and exterior trim rings hide the edge of the hole through the deck
  • Removable insect screen included
  • Two year warranty

    Dimensions:
  • 10" overall diameter
  • Fits standard 4-3/4" diameter hole used to install earlier 4" snap-in NICRO vents
  • Net Inside Diameter: ~ 4"

    Important notes:
    1) If you have a 3" vent and would like to install this 4" vent, here is a trick: Since there is already a hole in the deck, there is nothing for the pilot bit to drill through. Use both 3-3/4" and a 4-3/4" hole saws. Place the 4-3/4" saw on the mandrill first. Now screw on the 3-3/4" saw inside of it. The smaller saw will act as the pilot as the larger saw bores a nice, clean 4-3/4" diameter hole!

    2) There is a plastic version of this vent available for about $20.00 less but we don't carry it. In our experience the white plastic housing yellows when exposed to UV light. In a year or two the vent looks old and funky. The stainless shroud on our vent covers the plastic housing and still looks new for years.



  • More Images: (click to enlarge)