Various articles covering frequently asked questions, informative bits of information, and even a spot of humor.
Our free tech support line is manned by a small team of sailors with decades of experience.
| 10210 Systems Parkway, Suite 390 Sacramento, CA 95827 |
|
| [email protected] | |
| 1-800-959-SAIL (7245) |
This motor bracket is fabricated from tubular stainless steel, two big springs counterbalance engines that weigh up to 80 pounds. Includes the white plastic motor mount board for low maintenance and a stainless steel backing plate as pictured for superior strength.
Mounting holes match earlier models for easy retrofit without drilling. All pivot points are bushed with bronze and use compression tubes for low friction. Includes plastic board for reduced maintenance.
Vertical hole spacing center to center: 5"
Horizontal hole spacing center to center: 6-1/2"
The mount has 16-3/4" of travel.
1) The weight range refers to actual engine weight. Don't trust brochures. Weigh your engine before choosing a bracket to ensure proper counterbalance performance. Engines weighing up to 80 will be approximately balanced when moving between the run and stow positions. To set a 65 pound outboard to the deep position it will be necessary to push the engine down.
2) Due to its size and weight there is a required $10 crate charge and a flat rate of $39.00 for it to be delivered to your front door. Theses charge does not cover shipping for other items which may be on the same order which will be billed based on the standard shipping rate table. Add the required Crate60 listed below to your cart to save a call back from us for approval before processing.
This motor bracket is fabricated from tubular stainless steel, two big springs counterbalance engines that weigh up to 80 pounds. Includes the white plastic motor mount board for low maintenance and a stainless steel backing plate as pictured for superior strength.
Mounting holes match earlier models for easy retrofit without drilling. All pivot points are bushed with bronze and use compression tubes for low friction. Includes plastic board for reduced maintenance.
Vertical hole spacing center to center: 5"
Horizontal hole spacing center to center: 6-1/2"
The mount has 16-3/4" of travel.
1) The weight range refers to actual engine weight. Don't trust brochures. Weigh your engine before choosing a bracket to ensure proper counterbalance performance. Engines weighing up to 80 will be approximately balanced when moving between the run and stow positions. To set a 65 pound outboard to the deep position it will be necessary to push the engine down.
2) Due to its size and weight there is a required $10 crate charge and a flat rate of $39.00 for it to be delivered to your front door. Theses charge does not cover shipping for other items which may be on the same order which will be billed based on the standard shipping rate table. Add the required Crate60 listed below to your cart to save a call back from us for approval before processing.
Catalina Direct is the largest supplier of Catalina Yacht parts in the country. We specialize in parts, custom up-grades, and accessories. Worldwide delivery available.
