In order to save money, we recommend re-using your old halyard shackle and securing it to the halyard with a bowline knot, just as the factory did. If you need new shackles, see the related items below.

Switching from wire to line halyards has several additional advantages:
• Eliminate noise and damage to the mast caused by wire halyards slapping the mast
• Eliminate fish hooks in the wire that can cause injury
• Eliminate the wire to line splice that jams at the masthead and prevents the halyard shackle reaching the deck
• Provides for easier headsail changes in windy conditions

• Two spectra core lines (red makers and blue markers)
• Two Ball Bearing single blocks
• Four new masthead sheaves for line
• Two Ball Bearing double sheave deck organizers
• Two aluminum cam cleats
• All the hardware necessary for installation
• Mast step halyard plate
• Instructions
• Even the sealant is included

• Diameter: 1/4"
• Length: 60' & 65'
• Construction: Double braid continuous strand line without mill splices (see "Technical Support" below for the full story)
• Fiber: Polyester cover, w/ Dyneema core
• Stretch: Extremely low, approximately 1/4 that of polyester
• Color: White with red markers and white with blue markers respectively