Holding Tank For C-27 V Berth
Product #: H1882
[Add to Wishlist]
Heavy duty holding tank used in the Catalina 27. It is 3/8" thick, twice as thick as your original 3/16" thick tank. Holding tank failure is such a disaster that you don't want anything less. 20 gallon capacity. Includes three reinforced fittings in tank (inlet, outlet, and vent). The fittings provide the female pipe thread in the tank. The male pipe thread end of a hose barb fitting is installed into the female fitting. Choose the proper size and type of hose barb fittings from those shown below.
You must verify the dimensions of the tank are suitable for your use and supply location and dimensions of the female fittings. Print the tank drawing from the section below labeled "Read More" and locate the position and size of each fitting on the drawing. Fax the drawing to us at
1) This is an oversize item which does not conform to our standard shipping policies. Call 800/959-SAIL for a shipping estimate.
2) An additional packaging charge also applies to this item.
3) A 50% deposit will be billed when your order for this item is accepted. The balance will be billed when the product ships.
Note:This is a custom made part. You provide the information we need to build this product for you. Once you order it we are going to build it just for you, just as you asked. We never want to see it again, and no one else wants it either. So be careful and order it correctly the first time because it can't be canceled, returned, or magically changed into something different!