martin Spotanske
kent,wa
Boat Name: none
Model/Year: 1988 c-22
Hull No.
Hailing Port: wa |
 06/12/2009 11:46 AM Pacific Time
Where does Catalina install the outlet for an electric bilge pump if a customer opts for one at the factory for a C22? I'm really having trouble with just the thought of drilling a hole anywhere in my boat for one |
Robert Donehoo
Duluth Ga
Boat Name: Shady Deal
Model/Year: Catalina 22 1979
Hull No. 8940
Hailing Port: Lake Lanier Ga |
06/12/2009 1:08 PM Pacific Time
I have a 1985 new style and the outlet is in the upper port transom. It is a couple of inches under the rub rail. The area is tight but reachable behind the fuel tank wall. Someone put the outlet on the starboard side of my 1977 c22 but I am going to patch and paint and move the outlet to the transom also. |
martin Spotanske
kent,wa
Boat Name: none
Model/Year: 1988 c-22
Hull No.
Hailing Port: wa |
06/13/2009 9:03 AM Pacific Time
Thanks for the quick response Robert, is it near the port side corner of the stern? I ask this because I think it is impossible to drill and install a fitting directly the stern of the gas tank enclosure. |
Robert Donehoo
Duluth Ga
Boat Name: Shady Deal
Model/Year: Catalina 22 1979
Hull No. 8940
Hailing Port: Lake Lanier Ga |
06/15/2009 7:56 AM Pacific Time
I'll try to measure the exact location and see how they installed it. |
Robert Donehoo
Duluth Ga
Boat Name: Shady Deal
Model/Year: Catalina 22 1979
Hull No. 8940
Hailing Port: Lake Lanier Ga |
06/17/2009 10:55 AM Pacific Time
From the outside, the hole is about 5"-6" from the port side and 2" down from the rubrail. |
