John Flenniken Portland, Oregon
Boat Name: Penelope
Model/Year: C22/84
Hull No. CTHY2282M84F
Hailing Port: Rose City Yacht Club, Portland, OR |
04/12/2006 10:37 PM Pacific Time
I've noticed that the gasket has pulled away from the sliding hatch cover and moisture is coming in at the very center just behind the mast.
Do you need to remove the mast to slid off the hatch cover to install the new gasket?
What gasket material is required? I've noticed that it is fairly thick.
Any suggestions?
Thanks
John Flenniken
|
Bilbo Youngstown, Ohio
Boat Name: Sea Dog
Model/Year: Catalina 22 1987
Hull No. 13971
Hailing Port: Andover, Ohio |
04/20/2006 6:01 AM Pacific Time
I'm going to have to look but I don't believe that my sliding hatch has a gasket seal. I think that you might be referring to the pop-top gasket that you can buy at CD.
If so, it may be:
http://www.catalinadirect.com/index.cfm?fuseaction=product.display&Product_ID=50 |