jason Tx
Boat Name:
Model/Year: c-22
Hull No.
Hailing Port: clear lake |
06/23/2006 9:38 AM Pacific Time
i was oiling some wood on the deck and some oil leaked under the tape and onto the fiberglass. any sggestions on removing it? |
Thomas Lang North Granby, CT
Boat Name: Puravida
Model/Year: C27/1981
Hull No.
Hailing Port: Noank, CT |
06/23/2006 10:48 AM Pacific Time
Jason:
As long as it's not near any gaskets or caulk type material, try some acetone, followed by a good rinse with regular soap and water....
Tom |
Stan Hullett Littleton CO
Boat Name: Hanky Panky
Model/Year: 1979 C-25
Hull No.
Hailing Port: Chatfield State Park |
06/23/2006 10:52 AM Pacific Time
Bar-Keepers-Friend in the scouring powder dept. of your local store. It contains a mild bleach, apply to a wet deck, work into a thin paste, let it work a bit, rince well! It will leave the deck dull where used, just rewax if needed. Good Stuff!
Stan |
R. C. Luiken Milford, DE
Boat Name: Ricochet
Model/Year: C-22 Swing Keel/1986
Hull No. 13560
Hailing Port: Milford, DE/St. Michaels, MD |
06/24/2006 4:52 AM Pacific Time
Zud will work too. It can be found in grocery stores with the kitchen cleaners. Bon Ami is also pretty good and a lot less abrasive. |
jason Tx
Boat Name:
Model/Year: c-22
Hull No.
Hailing Port: clear lake |
06/24/2006 9:36 AM Pacific Time
thanks alot for the suggestions...ill try em out. |