Wayne San Diego
Boat Name: Arrythmia
Model/Year: 1972
Hull No. 1523
Hailing Port: Fiddlers Cove |
11/06/2006 5:28 PM Pacific Time
Hi All. Need a little advise trying to rewire my 22 from behind the port side setee forward to the bow light. Light above table had melted through wires, and there is no power forward of the setee all the way down the port side. Wiring seems to go in between the outer skin and liner. I have check out chip ahoy, but I need a little more help
Thanks
Wayne |
Boat Name:
Model/Year:
Hull No.
Hailing Port: |
11/06/2006 11:39 PM Pacific Time
Wayne,
I have my boat docked at Fiddler's Cove as well. I am pretty good with electrical wiring and would be glad to give you some help. Feel free to contact me off-line. beartronx AT earthling DOT net
Pete Kover
San Diego, CA
1988 C-22 Wing Keel #14729
"Wind Toy II" |
Bob Keim Nashville
Boat Name: Pursuit
Model/Year: C22/1976
Hull No.
Hailing Port: Nashville |
11/07/2006 4:25 AM Pacific Time
You are correct, the original wiring runs between the liner and the deck. The original wires are embedded in filler and are impossible to remove. You just need to run new wires down the edge of the liner as much out of the way as you can secure it. |
Wayne San Diego
Boat Name: Arrythmia
Model/Year: 1972
Hull No. 1523
Hailing Port: Fiddlers Cove |
11/07/2006 8:49 AM Pacific Time
Thanks Pete. I just sent you an email with my contact info.
Wayne |
Wayne San Diego
Boat Name: Arrythmia
Model/Year: 1972
Hull No. 1523
Hailing Port: Fiddlers Cove |
11/07/2006 8:50 AM Pacific Time
Hi Bob. They sure do not make it easy to replace things.
Wayne |