forgot your login?

Micro Carbon Cam Cleat

Part #: Z4249
Micro carbon cam cleat. Many cleat designs require you to drag the line through the cleat to open the cams. Once the line is cleated it is difficult to remove under load. This particular cleat also works brilliantly with the X-treme Angle Micro Fairlead Z4250 pictured below.
These cleats work better than most because:
• The cams are suspended on ball bearings for minimal friction.
• Low friction allows use of very lightweight springs so it's easy for the line to open the cams.
• A PTFE coating and curved top surface allows the line to slip into and open the cams with just a gentile downward pull.
• Cleat and un-cleat a line from the other side of the cockpit with a flick of the wrist.
• Handles line from 1/8" to 1/4" in diameter
• Safe working load: 150 pounds.

May we also suggest

Sealant / Adhesive UV