forgot your login?

Forestay Assembly
CP-22 MkI & MkII, Trim-2-Fit Version

Part #: CD7094
Capri 22 forestay.

We start with corrosion resistant type 316 stainless steel wire. Roll swaged fittings are used on top and we include a user installed swageless compression fittings for use on the bottom. A new open design turnbuckle body can be securely pinned to prevent the turnbuckle from unscrewing.
We include a selection of thrust washers and instructions for their use when there is a roller furler installed.
1) Custom items are made individually for you and may not be canceled or returned, so please choose carefully.

2) In 2010 Catalina started supplying their boats with Seldén masts and standing rigging. Current production Capri 22 (hulls 1259 and up) are now equipped with Seldén rigs. These boats require different mast fittings. If your boat has a Seldén rig, consider our #CD7096 forestay picured below under "May we also suggest".

3) This assembly is not suitable for use on a boat equipped with roller furling. In most cases the user installed stud is too large a diameter to fit inside of the furler. For example, a CDi Flexible Furler requires that the swaged stud at the top of the forestay turnbuckle extend up and into the hole in the furler foil. The larger diameter of the user installed terminal will not fit into the foil and therefore there is insufficient height inside of the furler drum / torque tube assembly for the turnbuckle to fit. See "May we also suggest" below for forestay options that may be more suitable.

4) This stay is made to order just for you. When you order it we cut the wire from a long reel and swage on the fitting. We can't splice it back onto the reel or remove the fitting we swaged on for you. Once you order it your order cannot be canceled, modified, returned, or exchanged, so please choose carefully!