forgot your login?

Lower Shrouds, Tall Rig, Improved Retrofit, CP-22 MkI & MkII <-2012

Part #: CD7055
Lower shroud set for Capri 22 tall rig. Includes chromed bronze open body turnbuckles for ease of maintenance and positive locking with cotter pins. This shroud set is made from type 316 stainless steel wire for increased corrosion resistance.

We have learned that the T-bar fittings (as were used at the top end of your original lower shrouds) are designed to be inserted into a stainless steel grommet in the mast. For an example of the proper attachment, refer to the method employed at the top of your forestay. The T-bar was not engineered to be used into a tang like the one used on the Capri 22 lower shroud at the spreader bracket. Doing so applies the load directly to the end of the T which was never intended.

Our redesigned shrouds have addressed this problem by using a custom toggle jaw fitting over the tang instead of a T-bar into the tang. No modification to your boat is required to install these new shrouds. Please refer to "More images" below for further explanation.

Warning! If you have the original T-bar fittings at the top of your lower shrouds, we highly recommend they be replaced with our new, stronger assembly.

Fits both Capri 22 MkI and MkII through hull number 1258, built in January of 2012, at which point a new rig manufacturer was used. The new style mast requires different length wires as well as different attachment fittings.

The length of this item is based on the original factory specifications. However, the previous owner, like Captain Jack Sparrow, may have had an entirely different idea about how to rig a boat! Please confirm this is the correct length for your particular boat. We cut it from a long length and can't splice it back together again. Your order cannot be canceled, returned or exchanged, but, like Jack, you may have a different idea of what you can use it for!

May we also suggest