forgot your login?

Turnbuckle, 5/16", Complete, Seldén Rig

Part #: Z3644
Complete 5/16" turnbuckle for Seldén rigs. Includes toggle fork, stud terminal, and turnbuckle body. Note that the toggle length is shorter than on other 5/16" turnbuckles. Some reference dimensions are listed below for comparison. These turnbuckles are manufactured by Seldén in-house and are only available complete.
Used on:
• Capri 22 hulls 1259 and up: Forestay, upper shrouds, and backstay (4 total)

Seldén 5/16" Turnbuckle:
• Length (minimum): 180mm (~ 7.4")
• Length (maximum): 254mm (~ 10.0")
• Travel: 74mm (~ 2.9")
• Length of body: 4.75"

Dimensions, non-Seldén 5/16" Turnbuckle:
• Length (minimum): 8.25"
• Length (maximum): 11.25"
• Travel: 3"

1) The lengths above are measured from the center of the clevis pin in the toggle fork to the end of the standing rigging wire (~1/4" up from the flat on the stud).

2) Some of the original turnbuckles supplied by Seldén used a T-bolt and toggle for the lower connection. The current design uses a marine eye with a pin pressed in and toggle which has a longer slot to allow rotation of the toggle. The fit and function of the different styles are the same, but the newer style do look different.

May we also suggest

Open Turnbuckle Body 5/16"