×

Login

forgot your login?

Boat Cover, Additional Cutout Charge

Part #: D1699
$36.00
The bottom hem of the boat cover extends to below the rub rail. It finishes with a shock cord inside of the hem that extends around the full perimeter of the boat. At each stanchion there is a flap that is closed with twist fasteners. There is a break in the shock cord that refastens outboard of the stanchion with a brass snap into a brass ring. This keeps the entire hem of the boat cover snug around the boat.
Since (almost) all boats have a bow pulpits and stanchions, the cutouts for the bow pulpit and stanchions are included in the price. There are also cutouts included as standard to allow the cover to fit around the shrouds with the mast standing. If you have lifeline stanchions, we can locate the cutout for the shrouds to accommodate the forward stanchions as well at no additional cost.

The photo to the left is showing the cutout that accommodates both stanchions of the bow pulpit as well as the mooring cleat. Add to our Boat Cover Measuring Diagram the location of your mooring cleats forward and/or aft so we can accommodate them, but there is an additional cost, one each of this part number.

When accomodations are required for an installed anchor roller, one of these charges are required for a specail anchor roller pocket.
This is a custom made part. You provide the information we need to build this product for you. Once you order it we are going to build it just for you, just as you asked. We never want to see it again, and no one else wants it either. So be careful and order it correctly the first time because it can't be canceled, returned, or magically changed into something different!