×

Login

forgot your login?

Spinnaker Sheets, C-22,
E-Z Glide Control Line Set

Part #: D2243
$57.69
These lines just happen to be suitable for two entirely different purposes:

Spinnaker sheets for the Catalina 22. Set includes two sheets usable for both cruising and racing spinnakers.

• Also used for E-Z Glide control lines.

See
Warnings & Notes tab for more detailed information regarding length when used with the E-Z Glide system.
• Diameter: 5/16"
• Lengths: 40' & 40'
• Construction: Double braid continuous strand line without mill splices (see "Technical Support" below for the full story)
• Fiber: Dacron Polyester cover, w/ Polyester core
• Stretch: Very low stretch
• Color: White with blue markers

See Warnings & Notes tab for more detailed information regarding length when used with the E-Z Glide system
Calculating the length of line for an E-Z Gilde system:

If you have an 8’ genoa track, typically your sailmaker will have cut your sail so the genoa car is approximately centered in the track while sailing to weather. For versatility, say you’d like to be able to position the car 75% (or 6’) aft of the forward end of the track. Since the purchase for the adjuster is 5:1, you will need 5 x 6 feet = 30’ + 2’ of line (for the bowline and figure eight knots) for a total of 32’. If you purchase this kit that includes 40’ of line for each side of the boat, you are left with of line 8’ of tail on each side to lead back to the cockpit.

If you have a larger sail, or one cut such that you must position your genoa car farther aft than 6’, or you simply want more tail, you may want longer lines. If so, we are happy to sell you any length of line you desire on a per foot basis. Just call the sales staff and ask for Z4637.

Technical Support

What is a Mill Splice
 What is mill splicing?