forgot your login?

Companionway Cover Custom Color C-25

Part #: E1874

Our cover protects the sliding hatch, railwood, companionway trim, crib boards and the threshold. Both male and female snaps are supplied with the cover. A tool is included with the kit, which is used to install the female snaps into the fabric. Some male snaps may already be installed on the boat for an existing pop top enclosure. You can install the female snaps on the cover to match the position of the male snaps that were originally installed for the pop top enclosure.

The photo is the same cover design installed on a Catalina 22.
You must verify the dimensions of this cover are suitable for your use. It is always possible that the previous owner made a change to the deck configuration of which you are not aware.

This custom product will be made in your choice of one of our several standard Sunbrella fabrics. Click on the Measurement Drawing in the "Technical Support" area below. Print the required drawing then email or fax the completed and signed drawing back to us.

Even if you already have a pop top curtain it is likely you will need to install additional snaps on the companionway trim and railwood in order to ensure a proper fit. Snaps are included for this purpose.
1) A 50% nonrefundable deposit will be billed when your custom order is accepted. The balance will be billed when the product ships.

2) This is a custom made part. You provide the information we need to build this product for you. Once you order it we are going to build it just for you, just as you asked. We never want to see it again, and no one else wants it either. So be careful and order it correctly the first time because it can't be canceled, returned, or magically changed into something different!

Technical Support

May we also suggest