Automatic pumping action is powered by the tug on the mooring line created when the boat moves with the wind or waves.

Capacity: 2,500 Liters / day (600 US Gallons / day)
Maximum suction height: 2.4m (~8.2')
Maximum suction length: 8m (~26.3')

Includes:
• Hose: 1/4" ID rubber hose, 9' 10" long (see optional add on hose, #Z5844, if needed)
• Spring weight: 5/16" OD, 2" long not including 1/2" ID eye
• Pump:
   Barbs, outside diameter: 5/16"
   Strap loops: 2-1/4" long by 1-1/4" wide at tips, overall length, across the pump: 10-3/16"
   Height overall, including barbs: ~5"

Installation:
1) The bilge pump has 2 loops, connect one to a mooring line.
2) Connect the other loop to the boat, keeping in mind that the hose and label must face up when installing and the pump must be kept above the water.
3) Place the hose with the spring weight in the lowest part of the boat, where it can easily drain the water. For more stability and safety, place another weight on the spring weight or use a fastener to secure the hose in place. The bilge pump is now ready.

1) Cannot replace safety moorings.

2) Not to be used in conjunction with mooring springs as the pump is flexible and provides the spring action.

3) Not to be used if temperatures drop below freezing.

4) Examine every season for signs of wear from exposure to the environment.