forgot your login?

Rudder Lock Handle for C-22, C-250 Kick-Up Rudder

Part #: D2142
Used in conjunction with the rudder locking disk set, the handle clamps the kick-up rudder down. A rudder lock bolt and nylock nut is included with the handle. Install the nylock nut at the outer end of the bolt after installing the rudder lock handle onto the bolt. This will prevent loss of the handle.
If you have a problem keeping the kick up rudder blade down, try adding a kick-up rudder detent rivet listed below.

Caution: Anti corrosion gel (now included in kit) must be applied to the threads and the through bolt where it passes through the rudder cheeks to prevent seizing and corrosion. Failure to do so may make it impossible to remove the bolt from the rudder cheeks in the future.