forgot your login?

Upper Shroud Chainplates C-27

Part #: H1863
Set of two upper shroud chainplates for the Catalina 27. Above deck level it provides two holes 3/8" holes where the upper shroud turnbuckle attaches. Typically the inboard hole is used to provide a slightly better angle for the jib sheet lead. Each plate is 31-3/4" long X 1-3/4" wide X 1/4" thick. Six 3/8" diameter mounting holes are provided spaced at 5" intervals.
Cover plates are provided for use on deck. A cover plate is used together with a high quality sealant to create a waterproof seal. We recommend you check this seal every four to five years by removing both the cover plate and chainplate. If there has been water intrusion, it will damage the plywood deck core as well as the interior main bulkhead. A chainplate that is kept in constant with moisture by the the saturated wood in the deck is also subject to crevice corrosion and failure.

Technical Support

Stainless Steel Crevice Corrosion
How simple maintenance can save your entire rig.

May we also suggest