Includes:
• (2) 1/2" & 3/4" Valve Stack Gaskets
• (2) 1" & 1-1/4" Valve Stack Gaskets
• (2) 1-1/2" & 2" Valve Stack Gaskets
• (1) O-ring (1/4" x 1/16")
• (1) O-ring (1/2" x 1/16")
• (1) O-ring 3/4" x 1/8"
• (1) O-ring 1-1/4" x 3/16"
• (1) O-ring 1-5/8" x 3/16"
• (1) Machine Screw
• (1) Sheet Metal Screw
• (1) Marelube 1oz tub

Required for 1/2" & 3/4" Seacocks:
• (2) Valve Stack Gaskets
• (1) Inner O-ring (3/4" x 1/8")
• (1) Handle Screw O-ring (1/4" x 1/16")
• (1) Handle Machine Screw
• (1) Marelube 1oz tub
Required for 1" & 1-1/4" Seacocks:
• (2) Valve Stack Gaskets
• (1) Inner O-ring (1-1/4" x 3/16")
• (1) Handle Screw O-ring (1/2" x 1/16")
• (1) Handle Sheet Metal Screw
• (1) Marelube 1oz tub
Required for 1-1/2" & 2" Seacocks:
• (2) Valve Stack Gaskets
• (1) Inner O-ring (1-5/8" x 3/16")
• (1) Handle Screw O-ring (1/2" x 1/16")
• (1) Handle Sheet Metal Screw
• (1) Marelube 1oz tub

1) Each valve is factory assembled and pressure tested. We cannot be responsible for valves disassembled and modified or reassembled improperly.

2) The vendor does not recommend replacing the o-rings found in the body nor the white gaskets, neither of which are included in this kit. If the either are needed to be replaced, the vendor recommends replacing the entire Seacock. Usually the o-rings found in the handle assembly are the primary service requirement. When a leak is found between the body segments, then replacing the flat gaskets included in this kit are recommended.

3) There were early versions in 1992 to 1994 production that did not include any gaskets. There was an interim version that included a machined groove to accept two large o-rings between the body segments and another modified version that included one flat gasket and one large o-ring in a machined groove. The current version of Seacock includes two flat gaskets and some of the early production may have overlapped with the final current version. We are supplying this kit for the current version of the Seacocks.