forgot your login?

Exhaust Riser C-28 Early B Series Engine

Part #: S8222
This exhaust riser is equipped with a circular flange to fit The "B" series Universal Diesels. The picture above is an example of a Catalina 28 exhaust riser with a circular exhaust flange used on Universal M25B engine. Your riser may look different. You must send us your old riser to achieve a correct fit.
Used on:
• Catalina 28 When equipped with a Universal M-25XPB engine.

We offer the exhaust flange gasket for this particular exhaust flange. See "May we also suggest" below.
1) CAUTION! This exhaust riser must be used with a properly installed thermal jacket. Due to the extreme fire hazard, we include the appropriate Thermal Jacket with each riser. Installing a riser without a thermal jacket is an extreme fire hazard that could cause death or serious injury and the complete loss of your boat.

2) We cannot overstate or take responsibility for the extreme danger inherent in an inboard engine's exhaust installation.
We strongly recommend you have an experienced boat yard perform exhaust system repair or replacement.

3) Never run your engine without a properly installed Thermal Jacket. In every Catalina installation there are combustible materials close enough to the riser to start a fire.

4) This item does not conform to the shipping table in the Shopping Cart. Additional shipping must be calculated. When you place your order we always call with a shipping quote before billing your card. For a quote in advance, just call 800/959-7245.

5) Although this part number represents the part used on the boat described above, there can be subtle changes from boat to boat. We will need your old exhaust riser to achieve a proper fit.

Technical Support