×

Login

forgot your login?

Friction Lever Mounting Flange Gasket Lewmar Hatch

Part #: Z5410
$3.95
Replacement foam gasket positioned under the top of the lens.

Over time the friction lever may loose it's ability to hold the lid due to a combination fatigue of the spring and wear to the friction surfaces.

Sold each.
Details:
Fits the Lewmar
trapezoidal forward hatches with these overall dimensions (measured on the outside of the boat):
• Aft edge: 653mm (~25.7")
• Forward edge: 540mm (~21.3")
• Fore to aft: 536mm (~21.1")
• Height off deck 37mm (~1-1/2")

As used on:
• Catalina 34
• Catalina 350
• Catalina 36
• Catalina 42
• Catalina 470

As well as the large square forward hatches with these overall dimensions (measured on the outside of the boat):
• Port to Starboard: 697mm (~27.5")
• Fore to aft: 697mm (~27.5")
• Height off deck 31mm (~1-1/4")

As used on:
• Catalina 400
• Catalina 440
• Catalina 445

As Catalina introduces new models, it is likely there will be other boats that use this same hatch. There may be other instances where this was used. It is also the case that not every boat described above used these. Please verify that your boat used a Lewmar Offshore series hatch matching the dimensions above.
Lewmar Size 70 Ocean C-445 Lewmar Size 65 Ocean