This panel is an easy replacement for the old push / pull breaker only.

Unfortunately the old breakers were always problematic because their action required an undue amount of force. Their modes of failure were:

1) Pulling "On" required enough force that the threads attaching the knob to the breaker would fail or...
2) The force required to switch on or off would break the panel itself.

As a result, their ongoing use fell to essentially zero. Availability is limited and expensive. As a superior alternative, we offer this replacement panel that Catalina used on newer boats. They are much more convenient to use as they are easy to switch on and off.

• Rating: 80 Amps
• Waterproof
• Ignition protected
• Trip / Reset method: push button / rotating reset lever

Dimensions:
• Width: 107mm (~4-3/16")
• Height: 95mm (~3-3/4")
• Mounting holes: 2.4mm (3/32") pilot hole for (4) #6 screws included
• Mounting hole spacing, center to center:
   Horizontal: 67mm (~2-5/8")
   Vertical: 73mm (~2-7/16")
• Clearance hole required: 80mm (~3-1/4")
• Depth behind mounting surface, including poles: ~35mm (~1-3/8")
• Pole spacing, center to center: ~27mm (~1-1/16")
• Pole diameters: ~6mm (~1/4")