×

Login

forgot your login?

Single Block 2-1/2", 1/2" w/ Snapshackle, C-30

Part #: Z3207
$108.95
This stainless steel ball bearing block is typically used for the spinnaker gear on the Catalina 30, but it may be used anywhere a temporary block is needed. Its convenient snapshackle makes it easy to install or remove from the boat. Use for a barber hauler, preventer, cruising spinnaker tack line, or an emergency block if you get an override on a winch which can't be freed without removing the load from the sheet.
To prevent the line from twisting or binding when used in a cascade or mainsheet system this block is supplied with a feature to lock the rotation of the shackle that is on top of the body of the block. With the use of an Allen wrench, tighten the set screw to lock the shackle in position. When used as a swiveling block, ensure the set screw is not tightened and the swiveling shackle can self-align to find the fairest lead.
• Sheave diameter: 2-1/2"
• Sheave width: 3/4"
• Line diameter: 1/2"
• Overall height (w/o shackle): 4"
• Bearings: Delrin
• Safe working load: 2400 pounds

May we also suggest