forgot your login?

Anchor Roller Long
C-28, C-30, C-310, C-320, C-34, C-36

Part #: Z2968
Created to replace the shorter rollers which were standard on many Catalinas. Some customers use this as a retrofit on earlier boats that had rollers attached to the stem fitting with a longer anchor roller. This roller will accommodate stowing a Bruce or CQR anchor (depending on size). The roller assembly is fabricated from a robust 0.18" thick stainless steel.

Includes a pre-drilled aluminum backing plate. Not imported from somewhere in Asia as most available on the internet are. Ours are made in USA.
Known usage:
• Catalina 28
• Catalina 30
• Catalina 310
• Catalina 320
• Catalina 34
• Catalina 36

There have been many changes to the decks over the years. Click on the additional picture below for a template including mounting hole dimensions so you can determine if this anchor roller will be useful aboard your boat.

• Length Overall: 30"
• Length of Base: 24-1/2"
• Width: 3"

1) If you are using this longer anchor roller to replace the earlier short roller, use the original fasteners for installation. If this is a new installation, fasteners must be purchased separately. See the related items below for the fastener kit.

2) This item does not conform to the shipping table in the Shopping Cart. Additional shipping must be calculated. When you place your order we always call with a shipping quote before billing your card. For a quote in advance, just call 800/959-7245.