×

Login

forgot your login?

C-36 MkII Interior Cushions, Trad., Main Cabin Only

Part #: A8354
$6,521.00



Have your cushions seen better days? Does your body ache just thinking about another night aboard your boat? Replace your cushions with new foam and modern fabric for a more comfortable nights sleep and an updated look.

Complete set of interior cushions for the main cabin with foam for the Catalina 36 with the traditional interior. Made from the original patterns used to make the cushions when the boat left the factory.
17 cushions are included in this set:
Main Cabin:
Port

• Fwd Backrest Cushion
• Outboard Fwd Backrest
• Outboard Aft Backrest
• Outboard Seat Cushion
• Aft Backrest Cushion
• Aft Seat Cushion
• Table filler cushion
Starboard
• Fwd seat cushion
• Fwd seat cushion backrest
• Outboard fwd seat cushion backrest
• Middle seat cushion (table filler)
• Middle seat cushion backrest
• Aft seat cushion
• Outboard aft seat cushion backrest
• Aft seat cushion backrest
Navigation Station (starboard)
• Navigation seat cushion
• Navigation seat cushion backrest
Aft Berth
• Backrest/bolster is included to match mainsaloon
• Mattress and seat sold separately

Please call to discuss the cushions as well as request sample fabric swatches.

Foam density is important factor to consider. Legacy Catalina's interior cushions were fabricated with with 1.4 lbs/cu. ft foam. We choose 2.0 lbs/cu. ft. for longer life and yet maintains a measure of comfort. Any less and the cushion will loose bounce back too quickly, any more and the cushions become uncomfortable.
1) This item does not conform to the shipping table in the Shopping Cart. Additional shipping must be calculated. When you place your order we always call with a shipping quote before billing your card. For a quote in advance, just call 800/959-7245.

2) An additional packaging charge applies to this item.

3) A 50% nonrefundable deposit will be billed when your order for this special order item is accepted. The balance will be billed when the product ships.

4) The number of cushions will vary depending on your boats year and hull number, please be prepared to provide this information.

5) Send in your original covers for the vendor to match snap locations or allow the vendor to choose the location to install the female snaps into the cushion. Some or all of the male snaps installed in the boat will be required to be moved to match the new cushion's female snaps. Male snaps are included.

6) This is a custom made part. You provide the information we need to build this product for you. Once you order it we are going to build it just for you, just as you asked. We never want to see it again, and no one else wants it either. So be careful and order it correctly the first time because it can't be

Technical Support