×

Login

forgot your login?

Vinyl Trim - Hatch

Part #: Z1761

Due to a break in the supply chain, this product is curently unavailable.

This part is not used on any new boats and has not been produced for years. There is some residual stock available at Catalina Yachts, but due to its age, it is very brittle and will likely break upon installation. Therefore, we no longer carry this product. We suggest you substitute part #Z1547 shown below under "May we also suggest". It is new, fresh product currently used on new boats. Measure your boat first to ensure the extra width will fit OK.
White molding, 3/4" high x 6.5' long. Trims the seam around an opening hatch (not the sliding hatch. See below) where the two major deck components, the deck and deck liner are joined. Used on the Catalina 22, Catalina 22 Sport, Capri 22, Catalina 25, Catalina 27, Catalina 30, Catalina 34 and Catalina 36 wherever a fiberglass opening hatch was installed.

Typically installed using 16 each, #8 x 3/4" phillips pan head sheet metal screws (not included).

Please measure the trim on your boat before ordering. Occasionally Catalina has surprised us by installing a different size trim than their literature specifies.

May we also suggest