Upper shroud tang set for Catalina 34 and Catalina 36 that do not have in mast furling.
Notice how the inboard and outboard tangs have unique bends that provide the proper clearance for the marine eyes to fit between them. Be sure to install them as pictured.
• Length: ~5-1/2"
• Width: 1-1/2"
• Bolt hole diameter: Cleared for 5/8"
• Rigging pin hole diameter: Cleared for 5/8"
Warning! This set does not include the compression tube or backing plates included when your boat was originally built. These parts are mandatory to supply the strength necessary for a proper installation. It is assumed that these parts are still in place and will be reused when new tangs are installed. Failure to properly install the correct components may cause the failure of the entire rig. Serious injury or death could result. If you are not 100% certain of the proper installation, refer this task to a qualified rigger or boat yard.