forgot your login?

Cutlass Bearing CP-26, C-27, C-28 <-724, C-270, C-30, C-310, C-320, C-34, C-36, C-38

Part #: K1719
Replacement cutlass bearing for 1" prop shafts, mounted in a prop strut.
• Catalina 27
• Catalina 270
• Catalina 28 up to and including hull 724. Also used on hull 727. For later hull numbers, see PT Z2673.
• Catalina 30
• Catalina 310
• Catalina 320
• Catalina 34
• Catalina 36
• Catalina 38

There were two different bearings used in these boats. The traditional cutlass bearing has a brass shell surrounding and supporting the rubber bearing. Some early boats used a bearing whose supporting sleeve was a non metallic composite. The non metallic design is made for boats whose bearing is installed in a stainless steel strut to avoid galvanic corrosion. This type has proven to be challenging to replace as they tend to disintegrate when you attempt to remove them.

Since no Catalinas were ever built with a stainless steel strut, there is no reason to use a bearing with a non metallic shell. Our brass shell bearing will replace a bearing of either design as long as the dimensions are the same. The brass shell has more inherent integrity making it easier to replace when the time comes.
• Inside diameter: 1"
• Outside diameter: 1-1/4"
• Length: 4"