×

Login

forgot your login?

Midship Mooring Cleat on Car, 1 1/4" track

Part #: Z2269
$81.74
Midship mooring cleat for use on 1 1/4" T track. May be used anywhere along the track as a midship cleat for use with spring lines.

Suitable for use on Catalinas that uses 1 1/4" T track including the Catalina 310, Catalina 320, Catalina 34, Catalina 36, Catalina 38, and the Catalina 42.
Materials:
• Cleat: Stainless Steel
• Car: Anodized aluminum car

• Car length: 6-1/2"
• Cleat length: 6"
• Overall height: 2-1/2"
• Locking pin diameter: 5/16"
1) Some newer Catalinas have inboard genoa track that is mounted in a groove so it is flush with the deck. If you want to install this car on a flush mounted track, you may have to remove the first three or four mounting bolts and raise the track out of its groove in order to slide the car onto the end of the track.

2) An easier option for installation on those boats with flush mounted track may be the stainless steel cleat shown below. If the length of the groove in the deck, forward or aft of the track, isn't long enough for the 6-1/2" car to slide onto the track, try the stainless cleat. The length of its car is only 5", making it easy to slide onto the end of the track. Measure your boat to determine which of the cleats is best for you.

Technical Support

The Importance of a Midship Mooring Cleat
Look like an expert even when docking shorthanded.