forgot your login?

Genoa Car Low Lead Block C-38, C-380,
C-42, C-445, C-470

Part #: Z2496
Low lead genoa car with large diameter sheave with ball bearings. Used on any boat equipped 1-1/4" T-track, such as the Catalina 38, Catalina 380, Catalina 42, Catalina 445, and Catalina 470.

10 Year factory warranty
• Stainless steel cheeks
• Hard coat anodized aluminum sheaves with Torlon ball bearings and needle bearings on separate race
• Integral stainless stand up spring
• Hinges from side to side to maintain the proper lead angle
• Spring loaded stop pin fits track's holes
• Pin can be locked in the raised position for easy adjustment
Approximate Dimensions:
• Fits track size: 1-1/4"
• Pin diameter: 0.261" (~9/32") for genoa track 5/16" stop holes
• Overall length: 6-3/8"
• Safe working load: 3,500 pounds
This block is a significant improvement compared to earlier blocks but improvements mean they are not identical to the original equipment blocks. Please confirm that they will fit on your earlier boat before ordering. One consideration, for example, is important if your boat has genoa track recessed flush with the deck. In this case, the track must stop before a blind end of the groove in the deck, providing a gap slightly longer than the length of the car to be installed. Otherwise you will not have room to slide the car onto the end of the track. C-375, C-445

May we also suggest