Our Catalina 400 kit includes modern snapshackle inspired pelican hooks at the gates. The highest quality pelican hook available is also the easiest design to open and close. Just squeeze and it snaps shut. The long lever makes it easy to tension the lifeline as you close the pelican hook.

We make installation simple. Detailed instructions are included to explain how the hand tools are used to cut and complete the pre-swaged wires. You cut and install the other ends to match the dimensions of your boat.

The assembly includes the tools needed for installation. Trim the wire to length with the stainless cable cutters. Install the last end fitting on each wire. The included hand swage tool, used before by the owners like yourself, may be returned for a refund.

1) All of our lifeline kits now include a high quality Japanese made bypass type wire cutter. Note: This is a compact tool that will therefore require two hands and all you can grunt to cut the robust 3/16 inch stainless lifeline cable.

If you would like larger cutters that take less effort to use, consider our #Z5542 13" cutters below under "May we also suggest". Call in your order if you want for a "package deal" which includes the larger cutters. Remember: for offshore sailing, having cutters aboard that will cut away rigging after a dismasting is considered required equipment.

If you don’t want to use hand cutters, you might prefer using a Dremel tool with an appropriate cut-off wheel.

Always use safety goggles when cutting stainless steel wire!

2) This item does not conform to the shipping table in the Shopping Cart. Additional shipping must be calculated. When you place your order we always call with a shipping quote before billing your card. For a quote in advance, just call 800/959-7245.

3) The pelican hooks in this kit have a replaceable pin mechanism. For this to be possible the pin must be removable. Removable pins can be lost. We highly recommend having a spare aboard for safety. We check all departing orders that include pelican hooks to ensure the pins are included. If you loose a pin or to order spares, see our Pelican Hook Rebuild Kit found under "May we also suggest" below.

4) The length of this item is based on the original factory specifications. However, the previous owner, like Captain Jack Sparrow, may have had an entirely different idea about how to rig a boat! Please confirm this is the correct length for your particular boat. We cut it from a long length and can't splice it back together again. Your order cannot be canceled, returned or exchanged, but, like Jack, you may have a different idea of what you can use it for!