All of the original equipment anchor rollers, regardless of length are fabricated from the same 3/16" thick type 304 stainless steel. If you are replacing the roller, presumably because it was bent, we are guessing you might want a thicker, stronger assembly, especially for this extra long roller.

Our heavy duty assembly is made from 1/4" stainless steel, a 33% increase. This increased thickness (and resulting strength) is desirable because the added length of a long anchor roller means it is subject to more load. If the conditions get nasty you don't want it to bend.

• Length Overall: 29"
• Base Length: 24"
• Base Width: 4"
• Type 316L stainless steel thickness: 1/4"
• Fastener spacing center to center: 1-3/4" side to side, 4" fore and aft
• Fastener specifications: Five square holes cleared for 5/16" carriage bolts

This item does not conform to the shipping table in the Shopping Cart. Additional shipping must be calculated. When you place your order we always call with a shipping quote before billing your card. For a quote in advance, just call 800/959-7245.