Table pedestal post for the interior dining table. Depending upon the design of the boat, two pedestals might be used, one short (for when the table is down to form a berth), and one long (for when the table is up to be used as a dining table). In other cases, like the dinette version of the Catalina 30, the short pedestal is not needed because the table rests on fiddles surrounding the dinette when used as a berth.
Used in the following boats (there may be others as well):
• Catalina 250 Wing Keel (long and short)
• Catalina 28 (long only)
• Catalina 30 Dinette Model (long only)
• Catalina 42 (long and short, two of each used)
This post is silver in color, fluted, tapered, and anodized. This post is sold by the inch with a maximum of 29". If purchasing the tube only, you must measure and provide the length of tube you require. The manufacture cannot determine the assembled with bases length you require due to the differences in the bases over the years. If you are purchasing the tube and bases, then provide the assembled length you require that includes the bases.
In the Quantity field above, order the number of full inches rounded to the next higher inch. Note your assembled distance from cabin sole to underside of table or length of tube only in the comments field at the bottom of the customer information entry form during checkout. For example, if you want a tube that will provide 12-1/2" from cabin sole to underside of table, order a Quantity of 13 and note 12-1/2" at check-out or if you require a 16-1/2" length of tube, order quantity of 17" and note the 16-1/2" length of tube in the comments field at the bottom of the customer information entry from during checkout.
1) This item does not conform to the shipping table in the Shopping Cart. Additional shipping must be calculated. When you place your order we always call with a shipping quote before billing your card. For a quote in advance, just call 800/959-7245.
2) A 50% nonrefundable deposit will be billed when your order for this item is accepted. The balance will be billed when the product ships.
3) This is a custom made part. You provide the information we need to build this product for you. Once you order it we are going to build it just for you, just as you asked. We never want to see it again, and no one else wants it either, So be careful and order it correctly the first time because it can't be canceled, returned, or magically changed into something different!
Caution: This part is not compatible with the "Bow Tie" table pedestal system.