Catalina Direct is the largest supplier of Catalina Yacht parts in the country. We specialize in parts, custom up-grades, and accessories. Worldwide delivery available.
0 items in the shopping cart
| 10210 Systems Parkway, Suite 390 Sacramento, CA 95827 |
|
| [email protected] | |
| 1-800-959-SAIL (7245) |
Traveler Control Dodger Retrofit Blocks Only
Part #: Z2570
$59.95
Do you have a flat mainsheet dodger installed and want to add a dodger? This custom block installs in place of the standard cam cleat located on the traveler control car at either end of your traveler.
Remove the cam cleat and install this ball bearing block in its place. It leads the traveler control line down from the traveler to deck level. From there, the line passes through a halyard lift block (shown below) and aft, under the dodger. Mount the original cam cleats on deck, aft, near the cockpit.
Sold by the pair. Includes machine screws and nuts for mounting to a flat OEM traveler.
Remove the cam cleat and install this ball bearing block in its place. It leads the traveler control line down from the traveler to deck level. From there, the line passes through a halyard lift block (shown below) and aft, under the dodger. Mount the original cam cleats on deck, aft, near the cockpit.
Sold by the pair. Includes machine screws and nuts for mounting to a flat OEM traveler.
Suitable for use on any Catalina 27 or 270, Catalina 28, Catalina 30, Catalina 34, Catalina 36, or Catalina 42 with a flat (not arched) mid-boom original equipment dodger.
• Sheave diameter: 1-1/2"
• Sheave width: 1/2"
• Suitable for: 5/16" or 3/8" line
• Bolt holes center to center: 1-1/2"
• Sheave width: 1/2"
• Suitable for: 5/16" or 3/8" line
• Bolt holes center to center: 1-1/2"
