forgot your login?

Sail Track Gate, C-42 with NG-80 Spar

Part #: T2015
Sail gate with thumb screw for Catalina 42 equipped with the NG-80 Spar. This mast is distinguishable by the presence of a spinnaker/whisker pole track that is molded in the face of the mast as part of the extrusion. Most masts required only one gate, but if your mast has slots cut out on both sides of the mast, then order two sets.
• Height: ~60mm (~2-3/8")
• Width: ~37mm (~1-1/2")
• Screw: ~3mm x ~15mm long
Slot details:
• Length, measured from inboard edge: ~15mm to 30mm (~5/8" to 1-1/8")
• Height: ~4mm (~3/16")

May we also suggest