×

Login

forgot your login?

Halyard, Main, w/ Eye Splice, C-380 std & tall, C-385, C-387, C-400, In-Mast Furling

Part #: M9210
$418.50
Main halyard for the Catalina 380 tall and standard rig, Catalina 385, Catalina 387, and Catalina 400 with 2" eye splice for in-mast furling.
• Diameter: 7/16"
• Length: 125'
• Construction: Double braid continuous strand line without mill splices (see "Technical Support" below for the full story)
• Fiber: Polyester cover, w/ Spectra core
• Stretch: Extremely low, approximately 1/4 that of polyester

Catalina was always very generous with the lengths due to the possibility of chafe so you can trim off and continue to use. The lengths below are from the owner’s manual or a rigging checklist.
Boat Model Requirements:
• C-380 STD (120' required) original 1/2" diameter
• C-380 Tall (123' required) original 1/2" diameter
• C-385 (120' required) original 3/8" diameter
• C-387 (120' required) original 1/2" diameter
• C-400 (125' required) original 1/2" diameter
1) The length of this item is based on the original factory specifications. However, the previous owner, like Captain Jack Sparrow, may have had an entirely different idea about how to rig a boat! Please confirm this is the correct length for your particular boat. We cut it from a long length and can't splice it back together again. Your order cannot be canceled, returned or exchanged, but, like Jack, you may have a different idea of what you can use it for!

2) A 50% deposit will be billed when your order for this item is accepted. The balance will be billed when the product ships. Catalina 385

Technical Support