Spreaders for Capri 14.2 <-2012, Coronado 15, Capri 16 and Capri 16.5 <-2010. Overall length 19". The original airfoil shape was made from an extrusion that is no longer available. These are machined from bar stock and are made to fit the original brackets.
Sold per pair
Each spreader is held is place with (2) clevis pins. You will need a total of (4) pins for the pair. Order some spare cotter rings as well if you do not have extra ones in your rigging toolbox. See "May we also suggest below."
Only one hole is drilled in each spreader bar so that the second one can be drilled once the spreaders are properly aligned. Installation instructions are included.
1) In order to secure the upper shroud to the outboard end of the spreaders, remember to order the Seizing Wire offered below under "May we also suggest".
2) In 2010 Catalina started supplying their boats with Seldén masts and standing rigging. Current production Capri 14.2 (hulls 5449 and up) and Capri 16.5 (hulls 1050 and up) are now equipped with Seldén rigs. These boats require different mast fittings. If your boat has a Seldén rig, check out pt HI2050 for the Capri 16.5 and part J8064 for the Capri 14.2 in "May we also suggest below.