×

Login

forgot your login?

Batten Set CP-14.2

Part #: J8050
$26.76
Batten set for the Capri 14.2 mainsail.

Your sailmaker just may have decided on a different length. Since sails are hand made, it is likely the individual batten will need to be trimmed to fit. We include end cap and glue so you can trim to just the right length for your sail.

Set of three pultruded fiberglass battens.
• Width: 5/8"
• Thickness: 1/8"
Lengths expected:
• 1 @ 17"
• 1 @ 23"
• 1 @ 29"
Lengths provided:
• 3 @ 30"

Trim to fit the length of your batten pocket. Since sails are handmade, they will vary from sail to sail. Always glue on the batten end caps with the glue provided to avoid loosing one at the forward end of the batten pocket where it will be difficult to retrieve.
These lengths are longer than the nominal length specified for the Capri 14.2. Since sails are made by hand, we supply extra length so you can trim to a proper fit for your individual sail. In addition, we provide three lengths greater than required for any of the three, so if you loose one, another will suffice. End caps are supplied loose so you can trim, then install the caps with the super glue provided.