Starting in the center of the photo working outboard to port and starboard, symmetric set up:
• Shackle set, lifting, 15/16" thick centerboard -- attached to centerboard with clevis pin, on centerline
• Single block -- attached to smaller of lifting shackle set, on centerline
• (2) Eye straps with blocks and #10 through bolts, washers, lock washers and nuts, -- through bolted to forward vertical surface of cockpit below storage compartment, Port & Starboard
• (2) Cheek blocks with #6 by 1-1/4" and #6 by 3/4" fasteners -- installed aft with self tapping screws to make turn out to upright blocks, Port & Starboard
• (2) Upright blocks with #6 x 3/4" fasteners -- installed outboard of check blocks to make turn up to cam cleats, Port & Starboard
• (2) Cam cleats with eye straps and #8 x 1-1/2" fasteners -- mounted on vertical surface to cleat lines for easy grasp and control, Port & Starboard
• (60) feet of 1/4" control line to allow for positioning control based on your sailing style

• Diameter: 1/4"
• Length: 60'
• Construction: Double braid continuous strand line without mill splices (see "Read More" below for the full story)
• Fiber: Polyester cover, w/ Polyester core
• Stretch: Very low stretch
• Color: White with red marker