Various articles covering frequently asked questions, informative bits of information, and even a spot of humor.
Our free tech support line is manned by a small team of sailors with decades of experience.
| 10210 Systems Parkway, Suite 390 Sacramento, CA 95827 |
|
| [email protected] | |
| 1-800-959-SAIL (7245) |
Sheer stripe tape with two stripes, both sapphire blue
Since the color of the tape on your boat has changed over time due to exposure to ultraviolet light, we highly recommend replacing all of the stripe on one side of the boat. If you replace just a section of the stripe, it will call attention to any gel coat repair. Even an excellent repair will be highlighted by the brighter color of the new shear stripe.
The sheer stripe tape may be multiple stripes but it is applied as one. There are 3 layers of material for easy installation. Peel back the first layer to expose the adhesive bottom side of the stripes. Carefully place the tape to the desired area and peel back the last layer exposing the non-adhesive glossy side of the stripes.
When installing new sheer stripe tape, thoroughly clean the surface first. See the Rapid Tac Sheer Stripe Spray offered below under "May we also suggest".
Sapphire Blue: 3/8"
Gap: 5/16"
Sapphire Blue: 7/8"
Total installed width: 1-9/16"
Length: 50'
Since every computer's screen has a different color temperature, the color displayed on your screen is unlikely to match the exact color of the tape.
Sheer stripe tape with two stripes, both sapphire blue
Since the color of the tape on your boat has changed over time due to exposure to ultraviolet light, we highly recommend replacing all of the stripe on one side of the boat. If you replace just a section of the stripe, it will call attention to any gel coat repair. Even an excellent repair will be highlighted by the brighter color of the new shear stripe.
The sheer stripe tape may be multiple stripes but it is applied as one. There are 3 layers of material for easy installation. Peel back the first layer to expose the adhesive bottom side of the stripes. Carefully place the tape to the desired area and peel back the last layer exposing the non-adhesive glossy side of the stripes.
When installing new sheer stripe tape, thoroughly clean the surface first. See the Rapid Tac Sheer Stripe Spray offered below under "May we also suggest".
Sapphire Blue: 3/8"
Gap: 5/16"
Sapphire Blue: 7/8"
Total installed width: 1-9/16"
Length: 50'
Since every computer's screen has a different color temperature, the color displayed on your screen is unlikely to match the exact color of the tape.
Catalina Direct is the largest supplier of Catalina Yacht parts in the country. We specialize in parts, custom up-grades, and accessories. Worldwide delivery available.
