1) This track is produced in 4' lengths. The kit includes one 4' length which you cut in half and trim to your desired length before installation.
2) If mounted on a second generation Catalina 22 you must provide a small plastic shim between the track and the deck if you want to span the short step in the deck toward the front of the track.
3) To obtain the closest match possible, the T track included with our kit is the
oem track used by Catalina Yachts. Unfortunately, Catalina didn't provide end stops, therefore there are no OEM end stops that exactly match the OEM track. Although there are various track manufacturers, there is only one source for the molded plastic end stop. Various tracks, even of the same size, are produced with risers of differing dimensions. This does not affect the functionality of any of the tracks, but it does mean that you will need to modify slightly (or simply trim off entirely) the little plastic tabs on the end stops that slip under the end of the track.
4) We include two end stops so that one end of the track is left open t
o facilitate removal of the cars for storage. If you want end stops on both ends of the track, order two more of our #Z3796 End Stops under May we also suggest" below.
5) This item does not conform to the shipping table in the Shopping Cart. Additional shipping must be calculated. When you place your order we always call with a shipping quote before billing your card. For a quote in advance, just call 800/959-7245.