Quick Order   |  Wish List   |   Log In   




 
Mastup Mast Stepper with 3/8

Mastup Mast Stepper with 3/8" Pintles


Part #: D1651

Price: $179.95

Order Now!

[Add to Wishlist] [Add to Gift List]

HOT!

Ideal for short handed mast raising. It's like a really strong crew in the cockpit holding the mast above his head for as long as you need.

Features:
  • Fabricated from square tubing for strength
  • White electrostatically applied powder coating
  • 3/8" Pintles are adjustable in height
  • Roller on top eases positioning the mast
  • Fits virtually any boat with an outboard rudder
  • Supports the mast while trailering
  • Eliminates raising & lowering problems on land or water
  • Telescopes to 9-1/2' high

    Step 1: Your mast stows and trailers horizontally supported by the bow pulpit mast carrier and the Mast Up.

    Step 2: While standing at the aft end of the cockpit, raise Mast Up to its extended position.

    Step 3: From the bow pulpit, walk the mast aft till the mast foot is at the mast step. The mast rolls aft on the Mast Up's roller. Insert the bolt through the mast step and the mast base. Your mast is already half way up!

    Step 4: Have a helper watch for stray shrouds that may lasso a winch... The mast is already partially stepped and supported by the Mast Up. You don't have to lift the mast from ankle height. Have your crib boards in place and slide your hatch shut. Secure the hatch with the hasp. Stand on the sliding hatch facing aft. Straddle the mast. Grasp the mast and lift the mast to its vertical position.

    Step 5: Have your helper lean against the mast to support it while you walk forward and pin the forestay. You're ready to sail!

    Note: Due to its size, a shipping charge of $23.00 for the mast up will be added to your invoice by our sales staff. This charge is in lieu of the standard shipping charge the online system calculates. This charge does not cover shipping for other items which may be on the same order which will be billed based on the standard shipping rate table.

    Note: When you order a special order item it sets off a chain of events like Willie Wonka in the chocolate factory. Once you turn the valve the chocolate is coming down the pipe. If you then decide you want caramel, the chocolate is still going to come out of the pipe. We can't put the Chocolate back in the pipe, so someone is going to have to eat it, and it's not going to be us! Your order can't be canceled, returned, or magically changed into caramel, so please order carefully the first time!



  • May we also suggest:
    No Image
    Mastup Mast Stepper with 1/2" Pintles

    No Image
    Fiberglass Mast Carrier Kit