forgot your login?

Traveler Control Dodger Retrofit Kit

Part #: Z3382
This kit provides the upper and lower turning blocks and the control lines to convert a mid boom sheeting traveler to a configuration that allows use of your dodger without the need to modify the dodger to allow the control lines to pass through it. The lines are sized to work for a traveler with 5:1 purchase. With this kit, the control lines come underneath the dodger. Simply remove the cleats on the ends of the traveler bar and relocate them aft of the dodger on the cabin top. In their place, mount the included traveler control blocks, and mount our halyard lift blocks (also included) below the traveler control blocks. Run your control lines and you are ready to go.
• Diameter: 5/16"
• Length: (2) @ 33'
• Construction: Double braid continuous strand line without mill splices (see "Read More" below for the full story)
• Fiber: Dacron Polyester cover, w/ Polyester core
• Stretch: Very low stretch
• Color: White with blue and white with red marker

The length of this item is based on the original factory specifications for a 5:1 purchase traveler. However, the previous owner, like Captain Jack Sparrow, may have had an entirely different idea about how to rig a boat! Please confirm this is the correct length for your particular boat. We cut it from a long length and can't splice it back together again. Your order cannot be canceled, returned or exchanged, but, like Jack, you may have a different idea of what you can use it for!

Technical Support

What is a Mill Splice
 What is mill splicing?

May we also suggest

Sealant / Adhesive UV 4000