Most LED trailer lights you find online are only approved for small fishing boat trailers up to 80" (6' 8") in width. They are not approved for any trailer under a Catalina, even a Catalina Capri 16. Our lights are approved for trailers over 80" in width such as are used under all of the larger trailerable Catalinas. Unlike other, wider replacement lights, their overall width is appropriate for mounting on the small metal mounting tabs welded onto trailers like the TrailRite trailers provided with the boats by Catalina Yachts
The old traditional wire harness required a jumper from one tail light to the other tail light, and also a jumper from one side marker to the other side marker. The tail lamp jumper in the old traditional harness is particularly difficult since most of the sailboat trailers lack a cross beam in the rear.
We provide a new wishbone style harness with two brown wires, one running down each side of the trailer, no need for a jumper. The brown wire will also power the side markers. The green wire supplies right turn and stop and the yellow wire supplies left turn and stop. No jumpers required making installation much easier.
We also include two quick connectors for easy removal of the tail lights when parking in an unsecured area.
Approved for use on OEM trailers for:
• Capri 16
• Capri 22
• Catalina 22
• Catalina 25
Tail lamps:
• Width (incl side light): 4-1/2"
• Height: 4-1/2"
• Depth: 1-7/8"
• Length of mounting studs: 7/8"
• Mounting studs center to center: 2"
• 15 LED's for tail, stop and turn
• 2 LED's dedicated to the side marker light
• 2 LED's dedicated to the license plate light
• Includes mounting washers and nuts
Marker lamps:
• Black base dimensions: 3-1/8" x 2"
• Overall dimensions with lens: 3-1/8" x 2" x 15/16"
• 2 Wire
• Screw or stud mounted (includes one mounting screw, lock washer, and nut)