forgot your login?

Fixed Mast Bracket C-30, C-34, & C-36 Gooseneck Fastener Kit

Part #: K2123
This bolt replaces the main vertical pivot bolt. We have chosen a longer bolt than the original that came with the gooseneck. This is to avoid having the threads of the shorter bolt bare against and wear the holes at the bottom of the gooseneck.
Since only a handful of new goosenecks are sold each year, there is no logical way to have a custom fastener fabricated for them. However, by simply purchasing a longer bolt, the shoulder of the bolt falls to the wear point rather than the threads. Yes, the extra thread hanging below the gooseneck in not tidy, but the bolt can be trimmed with a Dremel tool or good quality hacksaw blade. See our additional photos at the left for a more detailed understanding.
• Diameter: 3/8"
• Length: 5-1/2"
Note: The length of a bolt or machine screw is always measured from the underside of the head to the end of the bolt.
To prevent galling, lubricate all stainless steel threads with a thread lubricant like the one we offer below under "May we also suggest".

May we also suggest