Possible uses include but are not limited to:
• Headsail furling line control
• Retrofitting accidental jibe prevention rigging and control lines
• Secondary cleat option to allow unloading primary cleat or winch for line transfer

Rope clutch:
• Line diameter: 5/16" to 9/16" line
• Base dimension: 5-7/8" x 1-1/8"

Car:
• Length: 8"
• Width: ~1-13/16"
• Fits track size: 1-1/4"
    Top slot for horizontal portion of "T" track: 1.330" wide x 0.257" high
• Height, car only: ~3/4"
• Depth of car below top of track: 0.455" (~7/16"+)
• Allen head stop, set screw:
    Threads, length: 3/8-16, 1/2"
    Allen head, size: 3/16"

Assembly:
• Height, overall, car and rope clutch: ~4-1/4"
• Center of line entry / exit points above top of track: ~1-1/8"

Some T-track installations are in recesses molded into the deck. Make sure you have enough room for the car included with this clutch, both along the length of the track and on the end from which you intend to slide it on.