forgot your login?

Windlass Wireless Remote

Part #: Z4335

Due to a break in the supply chain, this product is currently unavailable.

This compact wireless remote control is a must have for boats with windlasses. Maxwell windlasses were standard on many Catalinas but this remote control option was not available through the factory when the boats were produced.
• Receiver with wiring and multi-plugs
• Wireless remote (water resistant)
• Lanyard (not shown in photos)
• Replaceable 12V battery
• Remote:
    Length: 63mm (about 2-1/2")
    Width: 48mm (about 1-7/8")
    Thickness: 16mm (about 5/8")
• Receiver:
    Length: 83mm (about 3-1/4")
    Height, including mounting straps: about 50mm (about 2")
    Depth, including mounting straps: about 32mm (about 1-1/4")
This is a stand alone upgrade for boats that have windlasses with up and down foot switches indicating that the install included a solenoid. If your windlass only has a single foot switch, then you will need to order an appropriate solenoid with this kit as well. A second foot switch is not required but is often nice to have the added wired control if there is room for it in your anchor locker or nearby.