Various articles covering frequently asked questions, informative bits of information, and even a spot of humor.
Our free tech support line is manned by a small team of sailors with decades of experience.
| 10210 Systems Parkway, Suite 390 Sacramento, CA 95827 |
|
| [email protected] | |
| 1-800-959-SAIL (7245) |
Main halyard for the Catalina 315, Catalina 320, Catalina 355, and Catalina 375 with 2" eye splice for in-mast furling.
• Diameter: 7/16"
• Length: 110'
• Construction: Double braid continuous strand line without mill splices (see "Technical Support" below for the full story)
• Fiber: Polyester cover, w/ Spectra core
• Stretch: Extremely low, approximately 1/4 that of polyester
Catalina was always very generous with the lengths due to the possibility of chafe so you can trim off and continue to use. The lengths below are from the owner’s manual or a rigging checklist.
Boat Model Requirements:
• C-315 (90' required) original 3/8" diameter
• C-320 (107' required) original 1/2" diameter
• C-355 (110' required) original 3/8" diameter
• C-375 (109' required) original 1/2" diameter
1) The length of this item is based on the original factory specifications. However, the previous owner, like Captain Jack Sparrow, may have had an entirely different idea about how to rig a boat! Please confirm this is the correct length for your particular boat. We cut it from a long length and can't splice it back together again. Your order cannot be canceled, returned or exchanged, but, like Jack, you may have a different idea of what you can use it for!
2) A 50% deposit will be billed when your order for this item is accepted. The balance will be billed when the product ships. Catalina 315, 355, 375
Main halyard for the Catalina 315, Catalina 320, Catalina 355, and Catalina 375 with 2" eye splice for in-mast furling.
• Diameter: 7/16"
• Length: 110'
• Construction: Double braid continuous strand line without mill splices (see "Technical Support" below for the full story)
• Fiber: Polyester cover, w/ Spectra core
• Stretch: Extremely low, approximately 1/4 that of polyester
Catalina was always very generous with the lengths due to the possibility of chafe so you can trim off and continue to use. The lengths below are from the owner’s manual or a rigging checklist.
Boat Model Requirements:
• C-315 (90' required) original 3/8" diameter
• C-320 (107' required) original 1/2" diameter
• C-355 (110' required) original 3/8" diameter
• C-375 (109' required) original 1/2" diameter
1) The length of this item is based on the original factory specifications. However, the previous owner, like Captain Jack Sparrow, may have had an entirely different idea about how to rig a boat! Please confirm this is the correct length for your particular boat. We cut it from a long length and can't splice it back together again. Your order cannot be canceled, returned or exchanged, but, like Jack, you may have a different idea of what you can use it for!
2) A 50% deposit will be billed when your order for this item is accepted. The balance will be billed when the product ships. Catalina 315, 355, 375
Catalina Direct is the largest supplier of Catalina Yacht parts in the country. We specialize in parts, custom up-grades, and accessories. Worldwide delivery available.
